// Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER

Detail Cantuman

Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER

Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER


Penelitian ini merancang unit display berbentuk wall-tile untuk produk footwear sebagai bagian dari interior toko EIGER, dengan fokus pada pemanfaatan limbah sebagai material utama. Objek desain dikembangkan sebagai solusi modular display berbahan dasar beton yang dikombinasikan dengan limbah tekstil poliester dan daun ketapang. Permasalahan utama yang diangkat adalah eksplorasi komposisi campuran material tanpa mengurangi kekuatan struktur beton. Metode yang digunakan adalah pendekatan eksperimental, dimulai dari proses hidrotermal pada limbah tekstil, pencacahan daun ketapang, formulasi adonan beton, hingga pengujian tekan di laboratorium. Komposisi campuran yang dihasilkan mampu menurunkan bobot beton hingga ±30% tanpa mengurangi kekuatannya. Strategi perancangan melibatkan studi kebutuhan toko, analisis ergonomi, dan pengembangan sistem modul. Proses mengikuti alur double diamond melalui enam tahap: studi literatur dan observasi lapangan, eksplorasi dan identifikasi material, uji coba dan validasi komposisi, analisis kebutuhan dan konteks toko EIGER, pengembangan desain, dan pembuatan prototipe. Tahap awal ditandai dengan pembentukan kerja sama pengolahan limbah, dan ditutup dengan terciptanya prototipe display yang dapat dipakai dan telah disetujui oleh klien.

This research presents the design of a footwear display unit in the form of modular tiles, intended as part of the interior for EIGER retail stores. The design focuses on the creative reuse of waste materials by combining lightweight concrete with polyester textile waste and fallen ketapang (Terminalia catappa) leaves. The primary issue addressed in this project is the formulation of a composite mixture that integrates these waste materials without compromising the structural strength of the concrete. An experimental approach was applied, involving hydrothermal processing of textile waste, shredding of ketapang leaves, concrete formulation trials, and compressive strength testing in the laboratory. The resulting mixture successfully reduced the concrete’s weight by approximately 30% while maintaining adequate strength. The design strategy includes analyzing store requirements, ergonomics, and developing a modular display system. The process follows the double diamond model through six stages: literature review and field observation, material exploration and identification, testing and validation, user needs analysis, design development, and prototyping. The initial stage began with collaborative material processing, and the final output was a functional display prototype that was accepted by the client.


LOADING LIST...

LOADING LIST...

Detail Information

Bagian Informasi
Pengarang Mirza Hasna Shavira / 322021006 - Personal Name
0428088705 - Maharani Dian Permanasari, S.Ds., M.Ds., M.Phil., Ph.D - Personal Name
No. Panggil 412DP/2025
Subyek beton, limbah tekstil, tegel dinding
Fakultas FAD
Tahun Terbit 2025
Jurusan Desain Produk
Deskripsi Fisik
Info Detil Spesifik


Citation

. (2025).Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER().Desain Produk:FAD

.Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER().Desain Produk:FAD,2025.Text

.Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER().Desain Produk:FAD,2025.Text

.Pengembangan Sistem Display Berbahan Beton Dan Limbah Tekstil Untuk Produk Footwear EIGER().Desain Produk:FAD,2025.Text

 



Homepage Info

Koleksi  ETD adalah merupakan Tugas Akhir mahasiswa Itenas dalam menempuh program Sarjana/Magister. Seluruh isi dari Tugas Akhir adalah merupakan tanggung jawab penulis sepenuhnya.

Koleksi


Total ETDs : 20100

Total Kunjungan: 111298 dari Maret 2018

Media Sosial / Kanal

Address

UPT Perpustakaan Itenas
Jl. PKH. Mustopha No.23
Bandung 40124, Indonesia
Phone: +62-22-7272215,
email: libary[at]itenas.ac.id

Fatal error: Uncaught Error: Call to undefined function curl_init() in /home/etdlibitenasac/public_html/index.php:115 Stack trace: #0 {main} thrown in /home/etdlibitenasac/public_html/index.php on line 115